All the parts arrived for my stereo, so I took the measurements from the SketchUp model I mentioned in the last post and built a mockup case out of cardboard. I mounted the parts to the cardboard, and soldered together all the wiring according to the circuit diagram (also covered in the last post). Here's some pictures of the results:
I cannot endorse Jim Beam, but there box sure was the right size for the job, and pretty darn sturdy! I think this will hold until I have a chance to build a wooden case.
Here's a video of the stereo in action:
Here's the previous posts about the Solar-Powered Stereo project: